Tattoo Subliblock 75cm
Print & Cut vinyl for Polyester dyed garments with dye blocker
Unit(s)
TATSB7510
Print & Cut
Tattoo Subliblock Print & Cut Vinyl
Tattoo SBB Optima is the 3rd generation SBB film by SEF Highly technical film designed to prevent migration when heat transferring to dyed polyester fabrics (sports jerseys type).
Tattoo SBB Optima is printable with solvent, ecosolvent and latex inks. It has a matte finish, high elasticity, and excellent touch. Even large designs can be applied without loss of wearing comfort.
Tattoo SBB Optima is printable with solvent, ecosolvent and latex inks. It has a matte finish, high elasticity, and excellent touch. Even large designs can be applied without loss of wearing comfort.
Migration / Re-Sublimation
Heat transferring films on polyester or polyamide fabrics can result in “migration”. The heat of the press can re-activate the inks and start migration (change the color) on the heat-transferred graphic. This migration, or resublimation, phenomenon can take 48 to 72 hours to happen, sometimes even 2 to 3 weeks.
1) If you transfer on fabrics other than polyester or polyamide there is no actual migration risk, you can therefore use any of our standard heat transfer films.
2) If you transfer on sublimated polyester fabrics (the back of the fabrics is white or lighter shade of color) a low temperature film like Tattoo Nylon can prevent migration. But test don’t guess and use SBB Optima films if you have any doubts !
3) If you transfer on dispersed dyed polyester fabrics (same color back and front of the fabric) the use of Tattoo SBB Optima films is mandatory.
4) “Soft shell” garments made out of dispersed dyed micro fibers are the worst “migration” case scenario, we recommend to carefully test Tatoo SBB Optima films every time.
Waterbased PU
Thickness (without liner): 160µ
Fastness: 60°CTransfer
Temperature: 145°C
Hot peel
Waterbased PU
Thickness (without liner): 160µ
Fastness: 60°CTransfer
Temperature: 145°C
Hot peel